Because of its highly directional pickup pattern, the PCC-170SW minimizes background noise and feedback. The microphone reproduces the voice with a clean, clear and natural sound. Since the microphone capsule is placed on a boundary or surface, direct and reflected sounds arrive at the diaphragm in-phase. This coherent addition of direct and reflected waves increases sensitivity 6 dB and prevents phase cancellations. The mic capsule is small enough to ensure phase coherency up to the highest frequencies in the audible spectrum, resulting in a wide, smooth frequency response free of phase interference. Clarity and reach are also enhanced.
The PCC-170SW offers a silent-operating membrane switch that is normally off. The switch can be configured for touch on/off, momentary on or momentary off. This configuration is set by a bottom-mounted DIP switch. A high-intensity LED lights when the unit is on. The microphones attenuate 70 dB when the switch is in the off position. Self-contained electronics eliminate the need for an in-line preamp. Powered by 12-48V phantom power, the PCC-170SW has a low-impedance mic level balanced output which permits long cable runs without hum pickup or high-frequency loss.
- Supercardioid polar pattern reduces muddy-sounding room acoustics and background noise
- CROWN PCC technologie (phase coherent cardioid) for clear and natural sound
- Programmable, silent operating on/off membrane switch
- Small and inconspicuous
- Applications:
- Security
- Lectern
- Houses of worship
- Distance learning
- Conferencing
- Polar pattern: supercardioid
- Frequency range: 40 to 20,000 Hz
- Sensitivity: 22 mV/Pa (-30 dBV)
- Max. SPL: 120 dB
- Equivalent noise level: 22 dB-A
- Signal/noise ratio: 72 dB (A-weighted)
- Impedance: 150 ohms
- Power requirement: 12 to 48 V phantom power to DIN/IEC
- Connector: Switchcraft TB3M
- Cable: 4.6 m (15′)
- Finish: black
- Dimensions: 8.6 x 12.3 x 2.3 cm (3.4 x 4.84 x 0.9 in.)
- Net weight: 170 g (6 oz.)














Reviews
There are no reviews yet.