- 10″ high-flex cable with attached preamplifier (XLR connection)
- Tailored frequency response for open, natural sound reproduction
- Compact, lightweight construction provides a low degree of visibility
- Interchangeable microphone cartridges are available (sold separately):
- RPM108 – Cardioid cartridge
- RPM110 – Supercardioid cartridge
- Type: Condenser (electret bias)
- Frequency response: 20–20,000Hz
- Polar pattern: Unidirectional (cardioid)
- Output impedance: Rated at 150 ohm (actual)
- Recommended minimum load impedance: 1 kohm (May be used with loads as low as 150 ohm with reduced clipping level
- Output Level (0dB = 1 volt per Pascal):
- Open Circuit Voltage: -56dB (1.6mV)
- Output Clipping Level (at 1kHz, THD < 1%):
- 2.5 kohm load: 11dBV (3.5V)
- 1 kohm load: 3dBV (1.4V)
- Maximum SPL
- 2.5 kohm: 163dB
- 1 kohm load: 155dB
- Dynamic Range (maximum SPL to A-weighted noise level): 132dB (2.5 kohm load)
- Signal-to-noise ratio: 63dB at 94dB SPL (IEC 651)
- Polarity
- Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector
- Recommended Operating Voltage: 11 to 52 VDC Phantom
- Environmental conditions: Operating temperatures: -7º C to 49º C (20º F to 120º F)
- Storage temperatures: 29º C to +74º C (-20º F to 165º F)
- Relative Humidity: 0 to 95%
- Net Weight: Microphone with cable and preamplifier: 156 g (5.5 oz.)




















Reviews
There are no reviews yet.